What Aspects Should I Pay Attention To When Choosing Home Decoration Floor?
(1) thickness. The thickness of the PVC floor is mainly determined by two aspects, that is, the thickness of the bottom layer and the thickness of the wear-resisting layer. The more common bottom layer thickness on the market: 2.0mm, 2.5mm, 3.0mm, 3.5mm, 5.0mm these five kinds, and the wear layer thickness is: 0.1mm, 0.12mm, 0.2mm, 0.3mm, 0.35mm, 0.5mm and so on. The longer the thicker floors in principle, the higher the price. Many consumers in the purchase of plastic floor, there is a big misunderstanding, that is, the price is not asked to ask the thickness, so the business is often to take the thinnest product to the consumer. Consumers should look for businesses that specializes in PVC flooring.
2. Raw materials and production technology. Multilayer composite sheet is composed of base layer, printing film and wear resistant layer. The quality of these three materials directly determines the quality of the plastic floor.
Bottom layer: the raw materials used by domestic manufacturers can be roughly divided into two types, namely, new materials and recycling materials. However, the quality of plastic flooring produced from recycled materials is not as good as that of the floor with new materials. Good base material is more elastic, water is not easy to deform, cold and heat is not easy to shrink, the use of time will not appear on the edge, but the base material made of recycled material is almost without elasticity, and the water will have obvious expansion to cause the edge to rise, and if the temperature drops too fast in winter, there will be obvious contraction phenomenon. It affects the beauty of the ground. As the general consumer does not have the ability to distinguish the quality of the bottom material, we suggest that consumers buy brand products, not to greedy for cheap use of the Shanzhai PVC floor.
Printing layer: the color brightness and fidelity of the printing layer produced by the imported printing layer and the large domestic factory are very good, but the printing layer produced in the small factory is easily discoloured. When consumers buy, it is best to find businesses with high integrity, so that the color of plastic floor will fade away and affect the appearance.
Wear-resistant layer: because of the manufacturer's different, the quality of the wear-resistant layer also has a larger difference, the poor quality of the wear-resistant layer is easy to shrink in addition to the crack, causing the floor edge to warp. It is also suggested that consumers should seek honest businesses to buy PVC flooring.
Production process: that is, the combined process of the three of the above, mainly divided into two kinds of hot pressing and extrusion, the high cost of hot pressing, the quality is more stable, the extrusion is easier to appear wear resistance layer off phenomenon. Most of the domestic enterprises adopt the extrusion method, while the imported products mostly adopt the hot pressing method.